TISCO 305 stainless steel coil, hot rolled 305 stainless steel strip supplier
The following are the major applications of grade 305 stainless steel:
▪ Spun or deep drawn eyelets
▪ Barrels
▪ Shells
▪ Cold headed rivets or screws
Grade 305 stainless steel can be welded using most of the resistance and fusion methods. Oxyacetylene welding is not preferred for this steel.
Hot working of grade 305 stainless steel can be done at 1149 to 1260°C (2100 to 2300°F). This process is followed by rapid cooling to obtain maximum corrosion resistance.
Grade 305 stainless steel can be drawn, spun, headed and blanked due to its low work hardening rate.
Grade 305 stainless steel can be annealed at temperature ranging from 1010 to 1121°C (1850 to 2050°F) followed by rapid cooling.
Grade 305 stainless steel is unresponsive to heat treatment. The hardness and strength of the steel can be increased through cold working.
The following table shows the chemical composition of grade 305 stainless steel.
| Element | Content (%) |
| Iron, Fe | 67 |
| Chromium, Cr | 18 |
| Nickel, Ni | 12 |
| Manganese, Mn | ≤ 2 |
| Silicon, Si | ≤ 1 |
| Carbon, C | 0.12 |
| Phosphorous, P | 0.045 |
| Sulfur, S | 0.030 |
The mechanical properties of annealed grade 305 stainless steel are displayed in the following table.
| Properties | Metric | Imperial |
| Tensile strength, ultimate | 585 MPa | 84800 psi |
| Tensile strength, yield (@0.2%) | 260 MPa | 37700 psi |
| Modulus of elasticity | 193 GPa | 28000 ksi |
| Shear modulus | 86 GPa | 12500 ksi |
| Elongation at break (in 50 mm) | 50 | 50 |
| Hardness, Brinell | 80 | 80 |
| Hardness, Knoop (converted from Brinell hardness) | 97 | 97 |
| Hardness, Rockwell B (converted from Brinell hardness) | 45 | 45 |
| Hardness, Vickers (converted from Brinell hardness) | 82 | 82 |
Other designations that are equivalent to grade 305 stainless steel include the following.
| AMS 5514 | ASTM A240 | ASTM A478 | QQ S766 |
| AMS 5686 | ASTM A249 | ASTM A492 | DIN 1.4303 |
| ASME SA193 | ASTM A276 | ASTM A493 | UNI X 8 CrNi 19 10 |
| ASME SA194 | ASTM A313 | ASTM A511 | JIS SUS 305 |
| ASME SA240 | ASTM A314 | ASTM A554 | JIS SUS 305 J1 |
| ASTM A167 | ASTM A320 (B8P, B8PA) | ASTM A580 | SAE 30305 |
| ASTM A193 (B8P, B8PA) | ASTM A368 | DIN 1.4303 | SAE J405 (30305) |
| ASTM A194 (8P, 8PA) | ASTM A473 | QQ S763 |
| 305 stainless steel strip sizes and specifications | |
| Grade | 305 |
| Cold rolled stainless steel strip | Thickness: 0.3mm- 3.0mm, Width: 5mm - 900mm,Surface: 2B/BA/SB/8K/HL/1D/2D etc |
| Hot rolled stainless steel strip | Thickness: 3.0mm - 16mm, Width: 10mm - 900mmSurface: No.1/pickling |
| Stainless steel foil | Thickness: 0.02mm- 0.2mm, Width: Less than 600mm, Surface: 2B |
| Standard | ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303, BS 1449, DN17441, G4305 |
| 305 stainless steel coil sizes and specifications | |
| Grade | 305 |
| Cold rolled stainless steel coil | Thickness: 0.3mm- 3.0mm, Width: 1000mm - 2000mm,Surface: 2B/BA/SB/8K/HL/1D/2D etc |
| Hot rolled stainless steel coil | Thickness: 3.0mm - 16mm, Width: 1000mm - 2000mmSurface: No.1/pickling |
| Standard | ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303, BS 1449, DN17441, G4305 |
| 305 stainless steel pipe sizes and specifications | |
| Grade | 305 |
| Stainless steel seamless pipe | Outside diameter: 4.0 - 1219mm, Thickness: 0.5 -100mm,Length: 24000mm |
| Stainless steel welded pipe | Outside diameter: 6.0 - 2800mm, Thickness: 0.3 -45mm,Length: 18000mm |
| Stainless steel capillary pipe | Outside diameter: 0.4 - 16.0mm, Thickness: 0.1 -2.0mm,Length: 18000mm |
| Stainless steel welded sanitary pipe | Outside diameter:8.0- 850mm, Thickness: 1.0 -6.0mm |
| Stainless steel seamless sanitary pipe | Outside diameter: 6.0- 219mm, Thickness: 1.0 -6.0mm |
| Stainless steel square pipe | Side Length: 4*4 - 300*300mm, Thickness: 0.25 - 8.0mm, Length: 18000mm |
| Stainless steel rectangular pipe | Side Length: 4*6 - 200*400mm, Thickness: 0.25 - 8.0mm, Length: 18000mm |
| Stainless steel coil pipe | Outside diameter: 0.4 - 16mm, Thickness: 0.1 - 2.11mm |
| Standard | American Standard: ASTM A312, ASME SA269, ASTM A269, ASME SA213, ASTM A213 ASTM A511 ASTM A789, ASTM A790, ASTM A376, ASME SA335, B161, SB163, SB338, SB667/668Germany Standard: DIN2462.1-1981, DIN17456-85, DIN17458-85·European Standard: EN10216-5, EN10216-2Japanese Standard: JIS G3463-2006, JISG3459-2012Russian Standard: GOST 9941-81 |
| 305 stainless steel profile sizes and specifications | |
| Grade | 305 |
| Specification | EN, DIN, JIS, ASTM, BS, ASME, AISI, ISO |
| Standard | ASTM A276/ASME SA276, ASTM A479/ASME SA479 & ASTM A164/ASME SA164 . |
| Stainless steel round Bar | Diameter: 2mm - 600mm |
| Stainless steel bright Bar | Diameter: 2mm - 600mm |
| Stainless steel hex Bar | Dimension: 6mm - 80mm |
| Stainless steel square bar | Dimension: 3.0 - 180mm |
| Stainless steel flat bar | Thickness: 0.5mm - 200mm, Width: 1.5mm - 250 mm |
| Stainless steel angle bar | as requirements |
| Length | Normally 6m, or produce as requirements |
| Surface | Black, Bright. Peeled and Polished, Solution annealed. |
| Delivery condition | cold drawn, hot rolled, forged, grinding, centerless grinding |
| Tolerance | H8, H9, H10, H11, H12, H13,K9, K10, K11, K12 or as per clients’ requirements |
| 305 stainless steel plate sizes and specifications | |
| Grade | 305 |
| Cold rolled stainless steel plate | Thickness: 0.3mm- 16.0mm, Width: 1000mm - 2000mm,Length: as requirements, Surface: 2B/BA/SB/8K/HL/1D/2D etc |
| Hot rolled stainless steel sheet | Thickness: 3.0mm - 300mm, Width: 1000mm - 3000mmLength: as requirements, Surface: No.1/pickling |
| Standard | ASTM A240/A480, ASTM B688, ASTM B463/SB463, ASTM B168/SB168, ASTM B443/SB443/B424/SB424B625/SB625 B575/SB575, JIS G4303,BS 1449, DN17441, G4305 |
| Stainless steel plate | Thickness: 8.0mm - 300mm, Width: 1000mm - 3000mmLength: as requirements, Surface: No.1/pickling |
